GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
To view the Dynamic MAC Address Table:<br />
1. Click Address Table > Dynamic Addresses. The Dynamic Addresses Page opens:<br />
Figure 5-59<br />
The Dynamic Addresses Page contains the following fields:<br />
• Address Aging – Specifies the amount of time the MAC address remains in the Dynamic<br />
MAC Address table before it is timed out if no traffic from the source is detected. The<br />
default value is 300 seconds.<br />
• Clear Table – Removes the current values from the table.<br />
• Interface – Specifies the interface for which the table is queried. There are two interface<br />
types from which to select.<br />
– Port – Indicates the Port for which the table is currently queried<br />
– LAG – Indicates the LAG for which the table is currently queried<br />
• MAC Address – Specifies the MAC address for which the table is queried.<br />
• VLAN ID – Specifies the VLAN ID for which the table is queried.<br />
5-78 Configuring The Device Using Your Browser<br />
v1.0, November 2006