GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
• Reauthentication Period – Displays the time span (in seconds) in which the selected port<br />
is reauthenticated. The field default is 3600 seconds.<br />
• Authenticator State – Displays the current authenticator state.<br />
• Quiet Period – Displays the number of seconds that the device remains in the quiet state<br />
following a failed authentication exchanges. The possible field range is 0-65535. The field<br />
default is 60 seconds.<br />
• Resending EAP – Defines the amount of time (in seconds) that lapses before EAP<br />
requests are resent. The field default is 30 seconds.<br />
• Max EAP Requests – Displays the total amount of EAP requests sent. If a response is not<br />
received after the defined period, the authentication process is restarted. The field default<br />
is 2 retries.<br />
• Supplicant Timeout – Displays the amount of time (in seconds) that lapses before EAP<br />
requests are resent to the supplicant. The field default is 30 seconds.<br />
• Server Timeout – Displays the amount of time (in seconds) that lapses before the device<br />
re-sends a request to the authentication server. The field default is 30 seconds.<br />
• Termination Cause – Indicates the reason for which the port authentication was<br />
terminated.<br />
5-22 Configuring The Device Using Your Browser<br />
v1.0, November 2006