GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
• UDP Port – The UDP port used to send notifications. The field range is 1-65535. The<br />
default is 162.<br />
• Filter Name – Includes or excludes SNMP filters.<br />
• Timeout – Indicates the amount of time (seconds) the device waits before resending<br />
informs. The field range is 1-300. The default is 10 seconds.<br />
• Retries – The amount of times the device resends an inform request. The field range is 1-<br />
255. The default is 3.<br />
• Delete – Removes the currently selected recipient. The possible field values are:<br />
– Checked – Removes the selected recipient from the list of recipients.<br />
– Unchecked – Maintains the list of recipients.<br />
2. Click . The Add Trap Station Management Page opens:<br />
Figure 5-82<br />
3. Define the relevant fields.<br />
4. Click . The SNMP Notification recipients are defined and the device is updated.<br />
Configuring The Device Using Your Browser 5-113<br />
v1.0, November 2006