GS700TS Series Smart Switch Software User Manual - Andover ...

More documents

Recommendations

Info

• Providing Access Control Checks To define trap station management: GS700TS Series Smart Switch Software User Manual 1. Click Advanced > SNMP > Trap Station Management. The Trap Station Management Page opens: Figure 5-81 The Trap Station Management Page is divided into the following tables: • SNMPv1, 2c Notification Recipient • SNMPv3 Notification Recipient SNMPv1, 2c Notification Recipient The SNMP v1, v2c Recipient table contains the following fields: • ID – Indicates the stacking number. • Recipients IP – Displays the IP address to which the traps are sent. • Notification Type – Displays the notification sent. The possible field values are: Configuring The Device Using Your Browser 5-111 v1.0, November 2006
GS700TS Series Smart Switch Software User Manual – Traps – Indicates traps are sent. – Inform – Indicates informs are sent. • Community String – Displays the community string of the trap manager. • Notification Version – Displays the trap type. The possible field values are: – SNMP V1 – Indicates that SNMP Version 1 traps are sent. – SNMP V2c – Indicates that SNMP Version 2 traps are sent. • UDP Port – Displays the UDP port used to send notifications. The default is 162. • Filter Name – Indicates if the SNMP filter for which the SNMP Notification filter is defined. • Timeout – Indicates the amount of time (in seconds) the device waits before re-sending informs. The default is 15 seconds. • Retries – Indicates the amount of times the device re-sends an inform request. The default is 3 seconds. • Delete – Removes the currently selected recipient. The possible field values are: – Checked – Removes the selected recipient from the list of recipients. – Unchecked – Maintains the list of recipients. SNMPv3 Notification Recipient The SNMPv3 Notification Recipient table contains the following fields: • ID – Indicates the stacking number. • Recipient IP – Displays the IP address to which the traps are sent. • Notification Type – Displays the type of notification sent. The possible field values are: – Traps – Indicates that traps are sent. – Inform – Indicates that informs are sent. • User Name – Displays the user to which SNMP notifications are sent. • Security Level – Displays the means by which the packet is authenticated. The possible field values are: – No Authentication – Indicates that the packet is neither authenticated nor encrypted. – Authentication – Indicates that the packet is authenticated. 5-112 Configuring The Device Using Your Browser v1.0, November 2006
Page 1 and 2:
GS700TS Series Smart Switch Softwar
Page 3 and 4:
Product and Publication Details Mod
Page 5 and 6:
v1.0, November 2006 Contents About
Page 7 and 8:
Managing System Files .............
Page 9 and 10:
v1.0, November 2006 About This Manu
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90: GS700TS Series Smart Switch Softwar
Page 139: GS700TS Series Smart Switch Softwar
Page 189: GS700TS Series Smart Switch Softwar
show all

GS700TS Series Smart Switch Software User Manual - Andover ...

Create successful ePaper yourself

Delete template?

Save as template?