GS700TS Series Smart Switch Software User Manual - Andover ...

More documents

Recommendations

Info

To map CoS values to queues: GS700TS Series Smart Switch Software User Manual 1. Click QoS > Mapping > DSCP to Queue. The DSCP to Queue Page opens: Figure 5-68 The DSCP to Queue Page contains the following fields: • DSCP In – Displays the incoming packet’s DSCP value. • Queue – Specifies the traffic-forwarding queue to which the DSCP priority is mapped. Four traffic priority queues are supported. 2. Define the relevant fields. 3. Click . The DSCP value is mapped to a queue and the device is updated. Configuring SNMP Security Simple Network Management Protocol (SNMP) provides a method for managing network devices. The device supports the following SNMP versions: • SNMP v1, v2c. Configuring The Device Using Your Browser 5-95 v1.0, November 2006
GS700TS Series Smart Switch Software User Manual • SNMP v3. The SNMP agents maintain a list of variables that are used to manage the device. The variables are defined in the Management Information Base (MIB). The SNMP agent defines the MIB specification format, as well as the format used to access the information over the network. Access strings control access rights to the SNMP agents. SNMP v3 applies access control and a new traps mechanism. In addition, User Security Model (USM) parameters are defined for SNMPv3, including: • Authentication – Provides data integrity and data origin authentication. • Privacy – Protects against the disclosure of message content. Cipher Block-Chaining (CBC) is used for encryption. Either authentication is enabled on an SNMP message, or both authentication and privacy are enabled on an SNMP message. However, privacy cannot be enabled without authentication. • Timeliness – Protects against message delay or message redundancy. The SNMP agent compares the incoming message to the message time information. • Key Management – Defines key generation, key updates, and key use. The device supports SNMP notification filters based on Object IDs (OIDs). OIDs are used by the system to manage device features. SNMP v3 supports the following features: • Security • Feature Access Control • Traps The device generates copy traps. This section contains the following topics: • Defining the Engine ID • Defining SNMP Users • Defining SNMP Views • Defining SNMP Communities • Trap Station Management • Trap Filter Settings 5-96 Configuring The Device Using Your Browser v1.0, November 2006
Page 1 and 2:
GS700TS Series Smart Switch Softwar
Page 3 and 4:
Product and Publication Details Mod
Page 5 and 6:
v1.0, November 2006 Contents About
Page 7 and 8:
Managing System Files .............
Page 9 and 10:
v1.0, November 2006 About This Manu
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74: GS700TS Series Smart Switch Softwar
Page 123: GS700TS Series Smart Switch Softwar
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189:
show all

GS700TS Series Smart Switch Software User Manual - Andover ...

Create successful ePaper yourself

Delete template?

Save as template?