GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
To define an SNMP group:<br />
1. Click Advanced > SNMP > Groups. The Groups Page opens:<br />
Figure 5-73<br />
The Groups Page contains the following fields:<br />
• ID – Indicates the stacking number.<br />
• Group Name – Displays the user-defined group to which access control rules are applied.<br />
The field range is up to 30 characters.<br />
• Security Model – Defines the SNMP version attached to the group. The possible field<br />
values are:<br />
– SNMPv1 – SNMPv1 is defined for the group.<br />
– SNMPv2c – SNMPv2c is defined for the group.<br />
– SNMPv3 – SNMPv3 is defined for the group.<br />
• Security Level – Defines the security level attached to the group. Security levels apply to<br />
SNMPv3 only. The possible field values are:<br />
5-102 Configuring The Device Using Your Browser<br />
v1.0, November 2006