GS700TS Series Smart Switch Software User Manual - Andover ...

More documents

Recommendations

Info

To open the Stack Management Page: 1. Click Stack Management. The Stack Management Page opens. Figure 5-21 The Stack Management Page contains the following fields: GS700TS Series Smart Switch Software User Manual • Master Election – When the stack is powered up and completes the boot-up process, the Master unit is elected within 0.5 seconds. The possible field values are: – Automatically – The master is selected automatically by software. – Force Master – Enables forcing the selection of a Stack Master. • Unit No. – Indicates the stacking member’s current number. Possible values are 1-6. • Unit No. After Reset – Indicates the stacking member’s future number after the stack is reset. Possible values are 1-6 or auto (automatically selected). Configuring The Device Using Your Browser 5-17 v1.0, November 2006
GS700TS Series Smart Switch Software User Manual Switching Between Stack Masters The Secondary Master replaces the Stacking Master if the following events occur: • The Stacking Master fails or is removed from the stack. • Links from the Stacking Master to the stacking members fails. • A soft switchover is performed via web interface. Switching between the Stacking Master and the Secondary Master results in a limited service loss. Any dynamic tables are relearned if a failure occurs. The running configuration file is synchronized between Stacking Master and the Secondary Master, and continues running on the Secondary Master. To switch between stack masters: 1. Open the Stack Management Page. 2. Select the Force Master radio button. 3. Select “2” from the drop-down list which enables switching the stack control to the Secondary Stack Master. 4. Click . A confirmation message is displayed. Configuring Device Security This section contains information for managing both storm control and port security and includes the following topics: • Defining Port Authentication Properties • Viewing EAP Statistics • Enabling Storm Control • ACL Overview • Defining MAC Based Access Control Lists • Defining RADIUS Settings • Defining RADIUS Settings • Defining RADIUS Settings • Defining TACACS+ Authentication 5-18 Configuring The Device Using Your Browser v1.0, November 2006
Page 1 and 2: GS700TS Series Smart Switch Softwar
Page 3 and 4: Product and Publication Details Mod
Page 5 and 6: v1.0, November 2006 Contents About
Page 7 and 8: Managing System Files .............
Page 9 and 10: v1.0, November 2006 About This Manu
Page 45: GS700TS Series Smart Switch Softwar
Page 97 and 98:
GS700TS Series Smart Switch Softwar
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189:
show all

GS700TS Series Smart Switch Software User Manual - Andover ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?