GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
Configuring Bandwidth Settings<br />
After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using<br />
either:<br />
• Committed Burst Size – Indicates the maximum number of data bits transmitted within a<br />
specific time interval.<br />
• Committed Information Rate – Indicates the rate that data is transmitted. The rate is<br />
averaged over a minimum time increment.<br />
The Bandwidth Page allows network managers to define the bandwidth settings for a specified<br />
egress interface. Modifying queue scheduling affects the queue settings globally. Queue shaping<br />
can be based per queue and/or per interface. Shaping is determined by the lower specified value.<br />
The queue shaping type is selected in the Bandwidth Page.<br />
To define bandwidth settings:<br />
1. Click QoS > General > Bandwidth. The Bandwidth Page opens:<br />
Figure 5-65<br />
5-90 Configuring The Device Using Your Browser<br />
v1.0, November 2006