GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
By double-clicking a listed switch, you can open the Web management for that switch.<br />
Alternatively, you can select a switch by clicking on it once, and then clicking Web Access. For<br />
more information on Web management, see Chapter 5.<br />
Main Screen > <strong>Switch</strong> Setting > Configuration Setting<br />
Select a switch by clicking on it. Then click Configuration Setting. The following screen pops up<br />
and displays the Product Name and MAC Address. From this screen, you can modify the<br />
following:<br />
• IP Address – Displays the currently configured IP address.<br />
• Subnet Mask – Displays the currently configured Subnet Mask.<br />
• Gateway – Displays the currently configured Gateway.<br />
• System Name – Provides a user-defined system name field. The System Name field helps you<br />
keep track of your switches. It can be any combination of letters and/or numbers.<br />
• Location – Provides a user-defined field to help you keep track of where this switch is. It can<br />
be any combination of letters and/or numbers.<br />
• DHCP – DHCP automatically obtains the IP information for the switch.<br />
Figure 3-9<br />
3-4 <strong>Smart</strong>wizard Discovery Program<br />
v1.0, November 2006
Change language