GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
GS700TS Series Smart Switch Software User Manual - Andover ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GS700TS</strong> <strong>Series</strong> <strong>Smart</strong> <strong>Switch</strong> <strong>Software</strong> <strong>User</strong> <strong>Manual</strong><br />
Network without DHCP Server<br />
A static IP address can be assigned to the <strong>GS700TS</strong> device even if the network does not have a<br />
DHCP server.<br />
1. Connect the <strong>GS700TS</strong> switch to your existing network.<br />
2. Power on the <strong>GS700TS</strong> switch by plugging in the power cord. The default IP is 192.168.0.239.<br />
3. Install the <strong>Smart</strong>wizard Discovery program on your computer.<br />
Start <strong>Smart</strong>wizard Discovery (Chapter 3 has detailed instructions on the <strong>Smart</strong>wizard<br />
Discovery).<br />
4. Click Discover to enable the <strong>Smart</strong>wizard Discovery to find your <strong>GS700TS</strong> switch.<br />
5. Click Configuration Setting (See Figure 2-3).<br />
Figure 2-3<br />
6. Choose Disable on DHCP. See Figure 2-4.<br />
7. Enter your static IP address, Gateway and Subnet, and then type your password and click Set.<br />
Please make sure your PC and <strong>GS700TS</strong> switch are in the same subnet (See Figure 2-5).<br />
2-4 Getting Started<br />
v1.0, November 2006
Change language