GS700TS Series Smart Switch Software User Manual - Andover ...

More documents

Recommendations

Info

The Port Security Page contains the following fields: • Unit No. – Indicates the unit number. • Interface – Displays the port or LAG name. • Interface Status – Indicates the host status. GS700TS Series Smart Switch Software User Manual • Learning Mode – Defines the locked port type. The Learning Mode field is enabled only if Locked is selected in the Set Port field. The possible field values are: – Classic Lock – Locks the port, and only forwards packets that have been learned statically or dynamically, prior to locking the port. The lock is effective immediately. – Limited Dynamic Lock – Indicates the port is unlocked. Locks the port after a userdefined number of MAC addresses have been dynamically learned on the port. After the port is locked, packets are forwarded only from MAC addressees that have been learned prior to locking the port. • Max Entries – Specifies the number of MAC address that can be learned on the port. The Max Entries field is enabled only if Locked is selected in the Set Port field. In addition, the Limited Dynamic Lock mode is selected. The default is 1. • Action – Indicates the action to be applied to packets arriving on a locked port. The possible field values are: – Forward – Forwards packets from an unknown source without learning the MAC address. – Discard – Discards packets from any unlearned source. This is the default value. – Shutdown – Discards packets from any unlearned source and shuts down the port. The port remains shut down until reactivated or until the device is reset. • Trap – Enables traps when a packet is received on a locked port. The possible field values are: – Checked – Enables traps. – Unchecked – Disables traps. • Trap Frequency (Sec) – The amount of time (in seconds) between traps. The default value is 10 seconds. Configuring The Device Using Your Browser 5-35 v1.0, November 2006
GS700TS Series Smart Switch Software User Manual 2. Click an interface you want to modify. The Modify Port Security Page opens: Figure 5-33 In addition to the Port Security Page, The Modify Port Security Page contains the following fields: • Interface – Displays the port or LAG name. The possible field values are: – All Ports of the Stack – Indicates the ports of the stack from which Storm Control is enabled. – All LAGs – Indicates the LAGs of the stack from which Storm Control is enabled. – All Ports of Unit No. – Indicates the ports of the unit from which Storm Control is enabled. – Port No. – Indicates the port number. – LAG No. – Indicates the LAG number. • Lock Interface – Locks the selected interface. To make a change, the Lock Interface must be unchecked. 5-36 Configuring The Device Using Your Browser v1.0, November 2006
Page 1 and 2:
GS700TS Series Smart Switch Softwar
Page 3 and 4:
Product and Publication Details Mod
Page 5 and 6:
v1.0, November 2006 Contents About
Page 7 and 8:
Managing System Files .............
Page 9 and 10:
v1.0, November 2006 About This Manu
Page 11 and 12:
Page 13 and 14: GS700TS Series Smart Switch Softwar
Page 63: GS700TS Series Smart Switch Softwar
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189:
show all

GS700TS Series Smart Switch Software User Manual - Andover ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?