DF500 Folder Operator Guide - Pitney Bowes Canada

DF500 Folder Operator Guide
Retrieving A Job From Memory
1. To retrieve a job from memory and set it up, press the Select
Job key repeatedly until the job you want is displayed:
2. If you press Enter, the job shown will be set up and the display
will show in succession:
JOB: 2
SETTING
SELECT JOB: 2?
YES: Enter No:
3. If you press key, the display will return to the normal running
mode without a job being selected.
Identifying A Job In Memory
1. Use the Select Job key to step through the available jobs
stored in memory. The appropriate indicators for paper size
and fold type will light up for each job. This way you can tell
what kind of job is stored under each job number.
SELECT JOB: 2?
YES: Enter No:
2. If you want to know exactly what dimensions are stored for
each fold plate, press the Fold 1 or Fold 2 keys. The display
will briefly show the fold plate dimension set for the job:
SELECT JOB: 2?
FOLD 1 = Ø9Ø.Ø
JOB: 2 READY
ØØØØØØ
3. If the job has a single fold, pressing Fold 2 will not display
a di men sion as fold plate 2 is closed for single fold applications.
26 SV40214 Rev. A