Printer DA70S, DA75S Operator Guide - Pitney Bowes Canada
Printer DA70S, DA75S Operator Guide - Pitney Bowes Canada
Printer DA70S, DA75S Operator Guide - Pitney Bowes Canada
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SV61665 Rev. D<br />
Specifications • Appendix A<br />
Print Modes (Print Resolution)<br />
The printer has three print resolutions. These resolutions are<br />
Executive (600), Letter (300), and Draft (150), which represent the<br />
horizontal density. Additionally, there are two Light Mode settings (ON<br />
and OFF), which represent the vertical density. When Light Mode<br />
is "ON", the vertical density setting is 300 DPI; when Light Mode is<br />
"OFF" the vertical density setting is 600 DPI. Refer to the table below<br />
for the print mode options.<br />
Print Quality: With Light Mode<br />
set to "ON":<br />
With Light Mode<br />
set to "OFF":<br />
Executive 600 x 300 DPI 600 x 600 DPI<br />
Letter 300 x 300 DPI 300 x 600 DPI<br />
Draft 150 x 300 DPI 150 x 600 DPI<br />
Fonts<br />
Resident Fonts<br />
Arial, Comic Sans MS, Courier New, Georgia, Impact, Kino, MSLogo,<br />
Symbol, Tahoma, Times New Roman, Trebuchet MS, Verdana,<br />
Webdings, Wingding, an OCR-A font and a Code 39 font. All fonts<br />
are scalable from 4 to 144 point size.<br />
Resident Font Enhancements<br />
Bold, Italic<br />
Downloadable Fonts<br />
Supports bitmapped, downloadable fonts.<br />
Cartridge Fonts<br />
Not Required. Fonts are downloaded with addresses.<br />
User-Definable Parameters<br />
• Font Characteristics<br />
• Address Placement<br />
• Barcode Characteristics<br />
• Print Quality<br />
A-3