Micropaq User Manual Model 406 and 408 - Medical Equipment Pros

More documents

Recommendations

Info

8 Chapter 1 General information Welch Allyn Micropaq Monitor Understanding the monitor and the FlexNet Network The monitor is intended to operate with an Acuity ® Central Station as part of Welch Allyn’s FlexNet network. FlexNet allows multiple devices to communicate through hardwired Ethernet networks and Wireless Local Area Networks (WLANs). The Acuity Central Station provides the primary display and entry of patient data for a patient connected to the monitor. To Other Acuity Central Stations Acuity Central Station 80 97 HR SpO2 FlexNet Network Access Points Micropaq monitors To Other Access Points Each patient-worn monitor supports two-way communication with an Acuity Central Station through an access point in the FlexNet network. The access point is a digital radio transceiver that connects to the FlexNet network. During monitoring, the monitor sends the patient data to Acuity. Acuity and the monitor continuously analyze the data. Acuity provides appropriate alarm or alert messages at the Central Station and other network devices such as a hallway message panel and the monitor itself. Acuity also stores the patient data for viewing or report printing. If the monitor is moved out of range or loses communication with the FlexNet network and Acuity, it continues to monitor the patient and display patient data. While not communicating with Acuity, the monitor continues to generate local patient alarms or alert messages. Patient data is not stored and Acuity does not perform waveform analysis or generate arrhythmia messages while the monitor is not communicating with Acuity. When the monitor is returned to within range of the FlexNet network, it automatically reconnects to Acuity. 80 97 HR SpO2 80 97 HR SpO2 80 97 HR SpO2
Directions for Use Chapter 1 General information 9 Monitor features Controls and connectors Snapshot key Battery pack latch Battery SpO2 Connector ECG Connector Visual Alarm Indicator Liquid Crystal Display Select Key and Silence Patient Alarm/ Equipment Alert Key Scroll Up Key and Reset Patient Alarm Tone Key Scroll Down Key and Main Menu Key SpO 2 connector clip (model 408) or cover (model 406) Back
Page 1 and 2: Micropaq ® Monitor Directions for
Page 3 and 4: Contents 1 - General information .
Page 5 and 6: 1 Intended use General information
Page 7 and 8: Directions for Use Chapter 1 Genera
Page 11: Directions for Use Chapter 1 Genera
Page 23 and 24: 2 Monitoring Connect a new patient
Page 25 and 26: Directions for Use Chapter 2 Monito
Page 39 and 40: 3 Alarms & alerts About alarms and
Page 41 and 42: Directions for Use Chapter 3 Alarms
Page 43 and 44: Directions for Use Chapter 3 Alarms
Page 45 and 46: 4 Monitor patient at Acuity While t
Page 47 and 48: 5 Maintenance This section provides
Page 49 and 50: Directions for Use Chapter 5 Mainte
Page 51 and 52: Directions for Use Chapter 5 Mainte
Page 53 and 54: 6 Reference Operating settings The
Page 55 and 56: Directions for Use Chapter 6 Refere
Page 63 and 64:
Directions for Use Chapter 6 Refere
Page 65 and 66:
7 General Compliance The 802.11a Wi
Page 67 and 68:
Directions for Use Chapter 7 Compli
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Index 1-Waveform display, 15 2-Wave
Page 79 and 80:
Directions for Use Index 75 Main Me
show all

Micropaq User Manual Model 406 and 408 - Medical Equipment Pros

Create successful ePaper yourself

Delete template?

Save as template?