Micropaq User Manual Model 406 and 408 - Medical Equipment Pros
Micropaq User Manual Model 406 and 408 - Medical Equipment Pros
Micropaq User Manual Model 406 and 408 - Medical Equipment Pros
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7<br />
General<br />
Compliance<br />
The 802.11a Wireless PC Card must be installed <strong>and</strong> used in strict accordance with the<br />
manufacturer’s instructions as described in the user documentation that comes with the<br />
product.<br />
This product contains encryption. It is unlawful to export out of the U.S. without obtaining<br />
a U.S. Export License.<br />
Federal Communications Commission (FCC)<br />
This device complies with part 15 of the FCC Rules. Operation is subject to the following<br />
two conditions:<br />
This device may not cause harmful interference.<br />
This device must accept any interference received, including interference that<br />
may cause undesired operation.<br />
This equipment has been tested <strong>and</strong> found to comply with the limits for a Class B digital<br />
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable<br />
protection against harmful interference in a residential installation. This equipment<br />
generates, uses, <strong>and</strong> can radiate radio frequency energy. If not installed <strong>and</strong> used in<br />
accordance with the instructions, it may cause harmful interference to radio<br />
communications. However, there is no guarantee that interference will not occur in a<br />
particular installation. If this equipment does cause harmful interference to radio or<br />
television reception, which can be determined by tuning the equipment off <strong>and</strong> on, the<br />
user is encouraged to try <strong>and</strong> correct the interference by one or more of the following<br />
measures:<br />
Reorient or relocate the receiving antenna<br />
Increase the distance between the equipment <strong>and</strong> the receiver<br />
Connect the equipment to outlet on a circuit different from that to which the<br />
receiver is connected<br />
Consult the dealer or an experienced radio/TV technician for help<br />
The user may find the following booklet prepared by the Federal Communications<br />
Commission helpful:<br />
The Interference H<strong>and</strong>book<br />
This booklet is available from the U.S. Government Printing Office, Washington, D.C.<br />
20402. Stock No. 004-000-0034504.<br />
Welch Allyn is not responsible for any radio or television interference caused by<br />
unauthorized modification of the devices included with this Welch Allyn product, or the<br />
61