KAPPA V ECHOS AC IOM.pdf - Industrial Air

2.3 LIFTING AND SITE HANDLING
Avoid sudden movements and jolts when unloading and positioning the unit. Internal handling procedures must
be conducted with care. Do not exert leverage on the components of the machine. The unit must be lifted by
inserting steel tubes through the lifting attachments shown by the relative labels (yellow arrow).
The unit must be lifted by harnessing it as shown in figure 1: use ropes or straps of sufficient length and spacer
bars to avoid damage to the unit’s side panels and cover.
4 m min.
Caution: ensure that the method of lifting does not allow the unit to
slip from chains and slings or turn-over or slide from lifting devices.
2.5 m min.
Figure 1
Blue Box 12
1
2.5 m min.