KAPPA V ECHOS AC IOM.pdf - Industrial Air

4.5 PROTECTION
The unit uses technical means to protect people from dangers that cannot be reasonably eliminated or limited
when the unit is designed.
It is forbidden:
- To remove or to make ineffective the protections designed for the safety of people;
- To tamper and/or modify, even partially, the safety devices installed on the unit
4.6 LIGHTING
Must allow working conditions without risks due to zones in shadow (as for instance during maintenance operations).
4.7 QUALIFICATION OF PERSONNEL - OBLIGATIONS
The user must know and apply the prescriptions related to safety in the working places of directives 89/391/CE
and 1999/92/CE.
The knowledge and the understanding of the manual are a necessary tool for the reduction of risks, safety and
health of operators.
The operator must have an adequate degree of knowledge to carry out the various activities during the phases of
the technical life of the unit.
4.8 VARIOUS INSTRUCTIONS
The operator must have knowledge against possible anomalies,
disfunctions dangerous conditions for him or for others, and must
comply with the following prescriptions:
- Immediately stop the unit via the emergency pushbutton(s);
- Not perform interventions outside his assignments and technical
knowledge;
- Immediately inform the responsible superior and avoid any
unauthorised actions,
In the use of the unit use the protection devices decreed by law, whether integrated in the unit or by human
activity.
The technical manual is kept by the manufacturer.
The manufacturer takes no responsibility for possible injuries to persons, domestic animals or damage to items
due to non respect of safety rules and recommendations contained in the supplied documentation.
This manual has to be integrated with information contained in other documents. Consult these documents
whenever necessary.
Blue Box 21