KAPPA V ECHOS AC IOM.pdf - Industrial Air

More documents

Recommendations

Info

4. SAFETY PRECAUTIONS The unit has been designed in accordance with to the followings directives: DIRECTIVES 98/37 CEE Units safety 89/336 CEE Electromagnetic compatibility 73/23 CEE Low tension 97/23 CEE Devices under pressure RULES - EN 60204-1: Machinery safety - electric equipment of units 12/1997 - Part 1: General rules - EN 50081-2: Electromagnetic compatibility – general rules on emission. 08/1993 - Part 2: <strong>Industrial</strong> environment - EN 50082-2: Electromagnetic compatibility – general rules on immunity 03/1995 - Part 2: <strong>Industrial</strong> environment - EN 292/2: Safety of machinery. General rules of design 09/1991 - Part 2 a: Specifications and technical principles. - EN 294: Safety of machinery - Safety distance to avoid contact with upper limbs. 06/1992 - EN 349: Minimum distance to avoid crushing of parts of human body. . 04/1993 - EN 378-2: Devices under pressure – Refrigeration plants and heat pumps: 01/2001 Safety and environmental requirements. - Part 2: Design, manufacture, test, installation, marking and documentation 4.1 DEFINITION OF DANGER ZONE Only authorised operators must be allowed in the vicinity of the unit. - The external danger zone concerns a space of approximately 2 m in width around the perimeter of the machine. Access to this area must be prevented by suitable guarding in the event that the unit is located in an unprotected area that is easily accessible to unauthorised persons. - The interior of the unit is designated as a danger zone. Any access to this zone must be by qualified personnel only after all electrical power has been de-energised. Blue Box 14
4.2 SAFETY RULES The unit is designed and built in accordance with the PED 97/23CE rules, to ensure the maximum level of safety. To avoid possible situations of risk adhere to the following rules at all times: - All work on the unit must be performed by qualified personnel. Before working on the unit, ensure that the designated personnel are conversant with the documentation supplied. - Always ensure there is a copy of the documentation in the immediate vicinity of the unit. - The operations indicated in this manual must be integrated with the procedures of instruction manuals of other systems or devices assembled in the unit. The manuals contain all the necessary information to manage, in safety, all devices and the possible operating modes. - Use the appropriate personal safety equipment (gloves, helmet, safety goggles, safety footwear, etc.) for all maintenance and control operations on the unit. -Avoid loose garments, dangling accessories such as ties, chains, watches which could be entangled in moving parts of the unit. - Use only tools and equipment that are in good working order. - The compressor compartment contains various high temperature components. Adopt the maximum caution when working in the vicinity of the compressors and avoid touching any parts of the unit without appropriate protection. - Do not work within the theoretical discharge trajectory of the relief valves. -If components are located in positions easily accessed by non qualified people it is mandatory that protection grilles, available as an accessory option, are installed. - The user must consult the installation and operating section of this manual regarding the systems incorporated. - All units have safety / warning labels. It is forbidden to remove any safety /warning label. It is forbidden to - Remove or by-pass any safety measure for people protection.- - Tamper and/or modify, even partially, the safety devices of the unit. - In case of alarm signals, and the consequent intervention of safety devices, the operator must contact qualified maintenance technicians. A possible accident could cause serious injuries or death. - All safety devices must be verified according to the instruction manual. Verification and repair/adjustment must be performed by qualified personnel authorised with a written instruction by the customer. A copy of the results of the repair/adjustment made must be left on the unit. A possible accident could cause serious injuries or death. The Manufacturer is not responsible for any damage to people, pets or objects due to the re use of any part of the unit for functions or assemblies different to its original purpose. It is forbidden to tamper/change without authorisation any component of the unit. The use of accessories, tools or components different from those recommended by the Manufacturer exonerates the Manufacturer from any civil or penal responsibility. The operations of removal and demolition of the unit must be carried out only by personnel adequately trained and equipped. Blue Box 15
Page 1: KAPPA V ECHOS 160 ÷ 964 kW Install
Page 4 and 5: Blue Box
Page 6 and 7: - compressor start sequence and aut
Page 8 and 9: SERIES The KAPPA V ECHOS series of
Page 10 and 11: TECHNICAL DATA (1) total water flow
Page 12 and 13: ELECTRICAL CHARACTERISTICS AND COMP
Page 14 and 15: SOUND POWER AND PRESSURE LEVELS STA
Page 16 and 17: 2.3 LIFTING AND SITE HANDLING Avoid
Page 20 and 21: MECHANICAL HAZARDS Operating mode A
Page 22 and 23: REFRIGERANT SAFETY DATA - R407C 1.
Page 24 and 25: 4.3 RISKS CAUSED BY EXPLOSIVE ATMOS
Page 26 and 27: 5 POSITIONING Read the following po
Page 28 and 29: Rubber/metal anti-vibration isolato
Page 30 and 31: HYDRAULIC CIRCUIT DIAGRAM VERSION K
Page 32 and 33: We strongly recommend installing a
Page 34 and 35: 6.7 HEAT RECOVERY EXCHANGER HYDRAUL
Page 36 and 37: 6.9 WATER FLOW RATE TO EVAPORATOR T
Page 38 and 39: 6.15 ELECTRICAL CONNECTIONS 6.15.1
Page 40 and 41: 6.15.7 OPERATING LIMITS KAPPA V ECH
Page 42 and 43: 6.15.9 User interface - Microproces
Page 44 and 45: 7. START-UP 7.1 PRELIMINARY CHECKS
Page 46 and 47: The low temperature water alarm wil
Page 48 and 49: 7.2.15 Defrosting (heat pump units
Page 50 and 51: If the unit fails to start: do not
Page 52 and 53: 8 CHECKS DURING OPERATION 8.1 INTRO
Page 54 and 55: 10. MAINTENANCE AND PERIODIC CHECKS
Page 56 and 57: 10.3.3 Refrigerant charge - Connect
Page 58 and 59: SYMPTOM E) No compressor running. D
Page 60 and 61: SYMPTOM K) No compressor running. D
Page 62 and 63: SYMPTOM R) One or more compressors
Page 64 and 65: SYMPTOM Y) One or more compressors
Page 66 and 67: A B C Uin Uout Lh Pm Ep Es OVERALL
Page 68 and 69:
Pm OVERALL DIMENSIONS, WEIGHTS AND
Page 70 and 71:
OVERALL DIMENSIONS, WEIGHTS AND HYD
Page 72 and 73:
C B A B C Uin Uout Lh Pm Ep Es OVER
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
REFRIGERANT CIRCUIT KAPPA V ECHOS 1
Page 82 and 83:
REFRIGERANT CIRCUIT KAPPA V ECHOS /
Page 86:
BLUE BOX Condizionamento AIR BLUE A
show all

KAPPA V ECHOS AC IOM.pdf - Industrial Air

Create successful ePaper yourself

Delete template?

Save as template?