CAN-CBX-AI420 - esd electronics, Inc.
CAN-CBX-AI420 - esd electronics, Inc.
CAN-CBX-AI420 - esd electronics, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.2 LED Display<br />
Fig. 3: Position of the LEDs in the front panel<br />
Hardware-Installation<br />
The <strong>CAN</strong>-<strong>CBX</strong>-<strong>AI420</strong> module is equipped with four status LEDs. The terms of the indicator states of<br />
the LEDs are chosen in accordance with the <strong>CAN</strong>open Standard DS303-3, V 1.2 (chapter 3.1). The<br />
indicator states of the LEDs are described in the following chapters.<br />
3.2.1 Indicator States<br />
In principle there are 8 indicator states distinguished:<br />
Indicator state Display<br />
on LED constantly on<br />
off LED constantly off<br />
blinking LED blinking with a frequency of approx. 2.5 Hz<br />
flickering LED flickering with a frequency of approx. 10 Hz<br />
1 flash LED 200 ms on, 1400 ms off<br />
2 flashes LED 200 ms on, 200 ms off, 200 ms on 1000 ms off<br />
3 flashes LED 2x (200 ms on, 200 ms off) + 1x (200 ms on, 1000 ms off)<br />
4 flashes LED 3x (200 ms on, 200 ms off) + 1x (200 ms on, 1000 ms off)<br />
Table 6: Indicator states<br />
The red LED flashes opposite in phase with the green LED!<br />
<strong>CAN</strong>-<strong>CBX</strong>-<strong>AI420</strong> Manual Rev. 1.3 9
Change language