Therma-Tru Slim-Line Sliding Patio Door Assembly and Installation
Therma-Tru Slim-Line Sliding Patio Door Assembly and Installation
Therma-Tru Slim-Line Sliding Patio Door Assembly and Installation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1<br />
2<br />
NOTE:<br />
A large work area is needed to assemble the frame kit. Cover area with cardboard<br />
from one or more door panel cartons to protect frame parts <strong>and</strong> floor.<br />
LAY FRAME COMPONENTS ONTO WORK AREA.<br />
Lay parts on floor <strong>and</strong> position sill, head <strong>and</strong> side<br />
jambs with exterior side up.<br />
ATTACH SILL TO JAMBS<br />
Apply sealant to sill as shown.<br />
Sill<br />
Exterior<br />
Side Jamb<br />
Sill<br />
NOTE: Be sure that foam pads are in place before assembling frame.<br />
Foam Pads<br />
Sealant<br />
Frame <strong>Assembly</strong><br />
Side Jamb<br />
Head Jamb<br />
Side Jamb<br />
Fasten side jambs to sill through pre-drilled holes<br />
using (3) #10 x 3“ flat head screws. (Starting with<br />
center screw is recommended.)<br />
Repeat for opposite side.<br />
#10 x 3“ Flat Head Screw<br />
3<br />
Sealant