U 100-C - Astro
U 100-C - Astro
U 100-C - Astro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12 Controller restart / Reset<br />
To restart the controller or to reset it to the factory default settings, you must switch to the corresponding<br />
sub-menu using the link “Restart/reset” on the left edge of the web interface. The<br />
following input mask appears:<br />
Figure 44: Input mask for controller restart/reset<br />
Selecting “Restart” will reboot the device, while retaining all settings.<br />
Selecting “Soft reset” deletes the current configuration of the U <strong>100</strong>-C. The network settings and<br />
user accounts will be retained.<br />
Selecting “Hard reset” restores the delivery state, i.e. the U <strong>100</strong>-C configuration, the network settings<br />
and user accounts will be deleted.<br />
Note:<br />
Selecting “Hard reset” may lead to the headend being unreachable by remote access.<br />
32<br />
Operating Manual U <strong>100</strong>-C Controller