You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Output settings<br />
<strong>Best</strong> <strong>Service</strong> Engine 1.0<br />
Manual<br />
As Engine already supports many different interfaces and because of all the different<br />
sequencer applications actually available sometimes it can be required or helpful to<br />
increase or reduce the number of available outputs.<br />
IMPORTANT: Thereby you can also save or require performance of your computer.<br />
At the moment the maximum amount of available outputs is set to 64<br />
MONO and 64 STEREO outputs per instance. Unfortunately many<br />
sequencer applications have different ways to manage additional output<br />
channels of plug-ins. Please read the manual of your sequencer<br />
application how to do it.<br />
Default Layer Format<br />
If you add a new Layer to your project, also a new output channel gets added to the mixer<br />
page accordingly. The output format of this channel in the mixer will be the default format<br />
you select in this pull-down menu.<br />
Default Root Key<br />
If you import audio files that do not contain a “root key” information, the selected key of this<br />
pull-down menu gets used as default root key.<br />
Use original BIT rate / Pre-convert to 32 BIT<br />
Engine comes with an automatic recognition and immediate internal adjustment of the<br />
settings of your sequencer application. Actually the compatibility up to 32 Bit/192 kHz is<br />
guaranteed. Thereby an entire compatibility to any sequencer and used hardware gets fully<br />
supported. Apart from this you can decide to convert the Audio Files already during the<br />
loading to the appropriate bit rate or to convert them from the RAM only until they get used.<br />
155