Download - Flir Systems

Day Running
Man Overboard
Night Running
Night Docking
Operation/Configuration Using JCU Buttons
SCENE
The SCENE button allows the user to toggle through a set of preconfigured
image settings, in order to select the best setting for the given conditions.
The M-Series automatically adjusts to changing scene conditions to provide
a high-contrast image that is optimized for most conditions. The camera
contains four preset SCENE settings that might provide better imagery in
certain conditions: Night Running, Day Running, Man Overboard, and Night
Docking.
While these names indicate their intended use, varying environmental conditions
might make one setting preferable over another; night running while in
a harbor, for instance. Experiment with the different settings, and find out
for yourself which settings works best in different conditions.
On dual payload models, pressing and holding the SCENE button will switch
between the thermal and visible-light cameras (for the video signal on the
VIS/IR cable).
USER
The USER button is a programmable one-touch button. It is intended to
allow the user to quickly access the most common or favorite settings or
functions.
Pressing and holding the USER button will automatically take the user to the
on-screen menu that is used to program the button. The menu can also be
accessed by pressing the MENU button and then scrolling down to the User
Programmable Button entry.
Note: The USER button is configured with the Invert Video Polarity setting by
default, so it will toggle the infrared imagery from white-hot (or red-hot, if
the COLOR setting is active) to black-hot.
Refer to the User Programmable Button section below for more information
about programming the USER button.
432-0003-00-10 rev 140 M-Series Operator’s Manual 29