Download - Flir Systems
Download - Flir Systems
Download - Flir Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Network Settings<br />
Network Settings<br />
IP Addresses<br />
By default, the camera and JCU device are configured to automatically<br />
determine IP addresses dynamically through UPnP. It is also possible to configure<br />
static IP addresses to coincide with addresses on an existing network.<br />
Note: On the JCU, the IP address is displayed by pressing the COLOR button<br />
and Puck at the same time. The IP is displayed for 3 seconds and then<br />
returns to the Camera name it had prior or the state it was in before the IP<br />
request was made.<br />
Note: it is not possible to display the camera’s IP address on the JCU display.<br />
When the Network Settings link is selected, the camera IP address, Mask,<br />
and Gateway are displayed, as show in the screen shot below. The Dynamic<br />
option is selected by default.<br />
58 432-0003-00-10 rev 140 M-Series Operator’s Manual