Download - Flir Systems
Download - Flir Systems
Download - Flir Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Note: As software updates<br />
become available in the future,<br />
the Firmware Update function<br />
will be used to load the update<br />
to the camera. Contact the<br />
FLIR dealer where you purchased<br />
the camera for additional<br />
information, or contact<br />
FLIR directly:<br />
+1.888.747.3547.<br />
Network Settings<br />
JCU Control<br />
The JCU web page allows the user to select the dynamic or static IP<br />
address option for the JCU. It is similar to the IP Address option described<br />
above for the camera. Note that a PoE power injector is necessary to connect<br />
a JCU to a PC. It is not possible to configure a JCU if it is not powered..<br />
60 432-0003-00-10 rev 140 M-Series Operator’s Manual