Download - Flir Systems

Main On-Screen Menu
Configuration Menus
If a menu entry begins with the word “Enable” (for example “Enable Color
Thermal Video”), then that option is currently disabled. When it is selected,
the option becomes enabled and the word “Enable” toggles to “Disable”. Similarly,
if an option begins with “Disable...”, selecting that menu entry will disable
the option and toggle the menu entry back to “Enable...”.
Video Setup Menu
From the main menu (shown at the left), the Video Setup entry will lead to
the following menu.
This menu is used to set the video configuration options.
Set Thermal Color Default
The Set Thermal Color Default saves the current Color setting as the default
value. This setting will be used when the system is booted up. When this
menu entry is selected, the menu entry changes to “Thermal Color Default
Saved” until Exit is selected.
Set Video Polarity
Selecting this item will toggle the infrared imagery from white-hot (or redhot,
if the COLOR setting is active) to black-hot. The difference between
white-hot and black-hot is shown below; white-hot is on the left and black-hot
on the right. The use of white-hot or black-hot display mode is strictly a personal
preference; experiment with the different settings in different conditions
and see which is preferred.
432-0003-00-10 rev 140 M-Series Operator’s Manual 31