DANGER - Blemo

More documents

Recommendations

Info

Documentation structure The following SH31 technical documents are available on the BLEMO website (www.blemo.com). User manual This manual describes how to install, commission, operate and program the soft starter. Quick Start guide This document is delivered with the soft starter, and you can download it on www.blemo.com. 6
Steps for setting up the soft starter (also refer to Quick Start guide) Steps 1 to 4 are performed with the power off. 1. Receive and Inspect the soft starter Check that the soft starter reference on the nameplate is similar to the purchase order. Remove the SH31 from packaging and check that it has not been damaged 2. Check the line voltage compatibility Check that the line voltage, and control voltage are compatible with the soft starter (pages 11 to 13). 3. Mount the soft starter vertically Mount the soft starter in accordance with the instructions in this document (page 17). 4. Wire the soft starter (page 29) Connect the motor, ensuring that its connections correspond to the voltage. Connect the line supply, after making sure that the power is off. Check and Connect the control supply on CL1-CL2 5. Configure the soft starter (page 45) Power on control, and do not give a start command. Adjust UIn line voltage. AdjustIn motor rated current. 6. Start 7
Page 1: 2354235 11/2008 Soft start - soft s
Page 4 and 5: AlImportant Information NOTICE Read
Page 8 and 9: Receiving and handling Introduction
Page 10 and 11: Selection Torque characteristic Sof
Page 12 and 13: Selection Standard application, SH3
Page 14 and 15: Dimensions and weights SH31-7.5 to
Page 16 and 17: Dimensions and weights SH31-110 to
Page 18 and 19: Mounting Soft starter ventilation O
Page 20 and 21: Mounting - Fan option Fan for frame
Page 22 and 23: Thermal protection Soft starter the
Page 24 and 25: Thermal protection Warm curves 24 t
Page 26 and 27: Wiring Installation Precautions Goo
Page 28 and 29: Wiring Refer to application diagram
Page 30 and 31: Wiring The SH31-.../4 range (230-44
Page 32 and 33: Wiring - power terminals Power Obse
Page 34 and 35: Wiring - power terminals Power conn
Page 36 and 37: Wiring - control terminals Electric
Page 38 and 39: Wiring - in line connection - appli
Page 40 and 41: Wiring - in line connection - appli
Page 42 and 43: Display terminal Functions of the k
Page 44 and 45: Remote keypad display - option The
Page 46 and 47: Programming Menu structure Two menu
Page 48 and 49: List of parameters Parameters acces
Page 50 and 51: Configuration menu (ConF) *: Write
Page 52 and 53: Settings menu (SEt) 52 Code Name/De
Page 54 and 55: Advanced adjustments menu (AdJ) (1)
Page 56 and 57:
Advanced protections menu (PrO) (1)
Page 58 and 59:
Advanced protections menu (PrO) (1)
Page 60 and 61:
Advanced IO menu (IO) (1)Only avail
Page 62 and 63:
Advanced communication menu (COP) (
Page 64 and 65:
Utility menu (UtIL) *: Write only w
Page 66 and 67:
Command channel Behavior on channel
Page 68 and 69:
Modbus Function This section descri
Page 70 and 71:
Modbus Function Write one output wo
Page 72 and 73:
Modbus Function Error management Ex
Page 74 and 75:
Maintenance Servicing It is advisab
Page 76 and 77:
Diagnostics / Troubleshooting Remot
Page 78 and 79:
Parameter Index and Modbus addresse
Page 80 and 81:
Parameter Index and Modbus addresse
Page 82 and 83:
Annex 1: UL508 schematics SH31.../4
Page 84:
Annex 2: Short-circuit rating and b
show all

DANGER - Blemo

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?