Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Steps for setting up the soft starter (also refer to Quick Start guide)<br />
Steps 1 to 4 are<br />
performed with<br />
the power off.<br />
1. Receive and Inspect the soft starter<br />
Check that the soft starter reference on the nameplate is similar to the purchase order.<br />
Remove the SH31 from packaging and check that it has not been damaged<br />
2. Check the line voltage compatibility<br />
Check that the line voltage, and control voltage are compatible with the soft<br />
starter (pages 11 to 13).<br />
3. Mount the soft starter vertically<br />
Mount the soft starter in accordance with the instructions in this<br />
document (page 17).<br />
4. Wire the soft starter (page 29)<br />
Connect the motor, ensuring that its connections correspond to<br />
the voltage.<br />
Connect the line supply, after making sure that the power is off.<br />
Check and Connect the control supply on CL1-CL2<br />
5. Configure the soft starter<br />
(page 45)<br />
Power on control, and do not give a start command.<br />
Adjust UIn line voltage.<br />
AdjustIn motor rated current.<br />
6. Start<br />
7