Waste reduction final report -4 - Test Input
Waste reduction final report -4 - Test Input
Waste reduction final report -4 - Test Input
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Figure 7: Results displaying window of BEAT-HOUSE<br />
AJI LCA-TOOL<br />
AIJ (Architectural Institute of Japan) has its own building assessment tool. The tool was<br />
developed in 1997 and is revised every 4 years. The AIJ LCA-TOOL includes environmental<br />
impact factors such as CO2, CFCs, NOx, SOx, Resource Consumption and C&D. See figure<br />
9 for indicative results.<br />
C&D Assessment Tool<br />
NILM (National Institute for Land Infrastructure Management) has developed a C&D waste<br />
assessment tool. The type and amount of C&D waste for a certain project can be calculated<br />
for the following four scenarios.<br />
Scenario I: Separation to the level required by The Construction Materials Recycling Act<br />
Scenario II: Scenario I plus separation into valuable resources and normal-level separation<br />
Scenario III: Scenario II plus separation of materials which is assigned by The <strong>Waste</strong><br />
Disposal and Public Cleaning Law or materials with well developed disposal systems that are<br />
currently available<br />
Scenario IV: Full separation (assuming that a disposal facility using an as-yet-unavailable<br />
technology is constructed)<br />
Figure 8: Result presenting sheet of CASBEE<br />
44