220-66-kv-xmer-on-line-nifes-r4-sept-08 - Gujarat Electricity Board

More documents

Recommendations

Info

GETCO/E/TS – XMER01power/R4 Sept 08 1.43 If GETCO Engineer will return without inspection of offered equipments due to nonreadiness of materials at their works than financial loss to the GETCO for deputing their representative will be recovered from the concerned supplier. 1.44 TRANSFORMER OIL: 1.44.1 (1) Manufacturers / Suppliers will have to supply the transformer oil as per GETCO’s Specification of Transformer oil attached herewith at Annexure - A. (2) At the time of inspection of transformer, bidder has to furnish the certificate / test reports of transformer oil purchased. Same should be meeting to GETCO’s transformer oil specification. At the time of inspection of the each power transformer, the supplier of the transformer shall arrange to take a sample of the transformer oil from the power transformer under testing in presence of GETCO’s representative and the supplier shall arrange at their cost the testing of the transformer oil sample as per Cl. 5.3 of IS: 18<strong>66</strong> - 1994 with latest amendments thereof at M/s. ERDA or any other Govt. recognized laboratory to confirm the quality of the transformer oil. The result of the same shall be submitted for approval. (3) After commissioning the transformer at site, in presence of representative, commissioning Engineer of Supplier of transformer, 2 nos. of joint samples may be collected and sealed. One sample will be sent for testing as per Cl. 5.3 of IS: 18<strong>66</strong> - 1994 with latest amendments thereof to M/s. ERDA, Baroda or Government approved Laboratory to confirm the quality of transformer oil and second sample will be preserved. In case of dispute for results of first sample, 2 nd sample should be got tested through any other approved test house by GETCO and results shall be binding to suppliers. 1.45 QUALITY ASSURANCE PLAN: The bidder shall invariably furnish following information's along with his offer, failing which his offer shall be liable for rejection. Information shall be separately given for individual type of equipments offered. 1. QAP for incoming material, in process and final checks and testing. 2. Statement giving list of important raw materials, names of sub suppliers for the raw materials, list of standard according to which the raw materials are tested. List of tests normally carried out on raw materials in presence of bidder's representatives, copies of test certificates. 3. Information and copies of test certificates as in (i) above in respect of bought out accessories. 4. List of manufacturing facilities available. 5. Level of automation achieved and list of areas where manual processing exists. 6. List of areas in manufacturing process, where stage inspections are normally carried out for quality control and details of such tests and inspections. Sign and Seal of Bidder Page 38 of 87
GETCO/E/TS – XMER01power/R4 Sept 08 7. Special features provided in the equipment to make it maintenance free. 8. List of testing equipments available with the supplier for final testing of transformer specified and test plant limitation, if any, for the special acceptance and routine tests specified in the relevant standards. These limitations shall be very clearly brought out in 'The schedule of divinations' for specified test requirements. 9. Field Quality Plan shall be submitted with the technical bid. Sign and Seal of Bidder Page 39 of 87
Page 1 and 2: GETCO/E/TS - XMER01power/R4 Sept 08
Page 37: GETCO/E/TS - XMER01power/R4 Sept 08
Page 87: GETCO/E/TS - XMER01power/R4 Sept 08

220-66-kv-xmer-on-line-nifes-r4-sept-08 - Gujarat Electricity Board

Create successful ePaper yourself

Delete template?

Save as template?