SYCON.net PROFIBUS MPI DTM (Operating Instruction Manual)
SYCON.net PROFIBUS MPI DTM (Operating Instruction Manual)
SYCON.net PROFIBUS MPI DTM (Operating Instruction Manual)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Glossary 116/119<br />
OPC-Server<br />
PDI<br />
PLC<br />
SCADA<br />
Symbolic Addressing<br />
Symbol Configuration<br />
STEP7<br />
OPC configuration software and application for the cyclic and acyclic OPC<br />
data handling inclusively the interfaces required. The OPC Server is based<br />
on the OPC DA 2.05a specification for cyclic and acyclic OPC data<br />
communication.<br />
Process Data Interface<br />
Programmable Logic Controller<br />
A digitally programmed device for controlling a machine or facility.<br />
Supervisory Control and Data Acquisition<br />
A concept for control and data acquisition of technical processes<br />
Server-side assignment of symbolic names to the absolute addresses of<br />
the input signals and output signals for OPC.<br />
Server-side signal configuration for OPC, with assignment of symbolic<br />
names to the absolute addresses of the input signals and output signals.<br />
STEP ® 7<br />
Programming language for the SIMATIC ® S7 ® Series of PLCs.<br />
<strong>DTM</strong> for Hilscher <strong>PROFIBUS</strong> <strong>MPI</strong> Devices | Configuration of Hilscher <strong>MPI</strong> Devices<br />
DOC0110402OI01EN | Revision 01 | English | 2011-07 | In Development | Public © Hilscher, 2007-2011
Change language