SYCON.net PROFIBUS MPI DTM (Operating Instruction Manual)

Diagnosis 68/119
5.3 General Diagnosis
Information regarding the Device State and other general diagnosis
parameters are displayed in the General Diagnosis dialog.
Figure 40: General Diagnosis
LED Meaning Color State
Device State
Communicating
Run
Ready
Error
Network State
Operate
Idle
Shows whether the PROFIBUS MPI device
executes the network communication.
Shows whether the PROFIBUS MPI device
has been configured correctly.
Shows whether the PROFIBUS MPI device
has been started correctly. The PROFIBUS
MPI device waits for a configuration.
Shows whether the PROFIBUS MPI device
records a device status error. For further
information about the error characteristics
and the number of counted errors refer to the
extended diagnosis.
Shows whether the PROFIBUS MPI device is
in data exchange. There is a cyclic data
exchange at the PROFIBUS MPI network.
Shows whether the PROFIBUS MPI device is
in idle state.
(green)
COMMUNICATING
DTM for Hilscher PROFIBUS MPI Devices | Configuration of Hilscher MPI Devices
DOC0110402OI01EN | Revision 01 | English | 2011-07 | In Development | Public © Hilscher, 2007-2011
(gray)
(green)
(gray)
(yellow)
(gray)
(red)
(gray)
(green)
(gray)
(yellow)
(gray)
Not COMMUNICATING
Configuration OK
Configuration not OK
Device READY
Device not READY
ERROR
No ERROR
In OPERATION state
Not
in OPERATION state
In IDLE state
Not in IDLE state
Stop Shows whether the PROFIBUS MPI device is (red) In STOP state