ePrism User Guide - EdgeWave

System Management
Using the Management Console
From the Centralized Management Console, you can perform a variety of administrative functions.
Group Commands
The following commands are applied to the entire management group:
• Centralized Management Command — From the drop-down box you can select a specific
function to execute across all members of the management group. The options include Refresh,
Stop All Queues, Run (Start) All Queues, and Backup.
• Select Auto Refresh — Select the time, in seconds, for automatic refresh of settings and
statistics for group members. Select Disable if you do not require Auto Refresh.
Member System Commands
The following commands are only applied to the specified group member:
• Start and Stop Services — You can start and stop services for each management group
member. The current status is also displayed.
• Connect — Connect directly to the specified member and open its administration screen.
• Backup — Backup the member server via FTP.
Note: Each group member must have its FTP backup configured individually before
this function will work from the console.
• Copy Configuration — Copy the selected settings from the management console to the
selected member. Each member can be configured individually to receive only certain settings
by selecting the check box of each configuration item.
Click Save to save your selected settings on the management console screen.
200