ePrism User Guide - EdgeWave

Configuring Mail Delivery Settings
Network Settings
The basic networking information to get ePrism up and running on the network is configured
during installation time. To perform more advanced network configuration and to configure other
network interfaces, you must use the Basic Config -> Network settings screen.
From the network settings screen you can modify the following items:
• Hostname and Domain information
• Default Gateway
• Syslog Host
• DNS and NTP servers
• Network Interface IP Address and feature access settings
• Clustering and Queue Replication interface configuration
• Support Access settings
Note: If you make any modifications to your network settings, you must reboot ePrism.
The system will prompt you to restart after clicking the Apply button.
Configuring Network Settings
Select Basic Config -> Network on the menu to configure ePrism's network settings.
• Hostname — Enter the hostname (not the full domain name) of the ePrism Email Security
Appliance, such as mail in the domain name mail.example.com.
• Domain — Enter the domain name, such as example.com.
34