ePrism User Guide - EdgeWave

Configuring Clustering
Click the Add or Update Member button to add the system as the Cluster Console.
Click Close to finish.
4. The Cluster Management console is then displayed.
Step 4: Adding Cluster Members
The following instructions describe how to add other systems to the cluster.
Caution: It is critical that any additions or deletions from the cluster configuration be
performed with only a single administrator logged in. If any changes to the configuration
of the Cluster Console are performed during a cluster configuration change, there is a risk
that initialization of a member will not process correctly.
1. Add cluster members by clicking the Add/Remove button in the Cluster Management
console.
2. Enter the Cluster Member hostname or IP Address, an optional name for the system, and the
Admin login ID and password. Click the Add or Update Member button to add the system.
209