ePrism User Guide - EdgeWave

SNMP MIBS
Alarm Objects
TABLE 5. Alarm Objects
Object
alTriggerAlarm
alLastChange
alName
alRemoteIpAddr
alDestPort
alAlarm
Description
The flag to trigger an alarm
The time value when the alarm condition occurs
A textual string containing the name of the alarm
Source IP address
Destination port number
The alarm trap
Mail System Objects
Current Mail Data
TABLE 6. Current Mail Data
Object
queuedMessages
deferredMessages
totalMessages
Description
The number of queued mail messages.
The number of deferred mail messages.
The total number of mail messages.
Historical Mail Data
TABLE 7. Historical Mail Data
Object
mailIndex
mailInterval
mailRcvd
mailSent
mailSpam
mailReject
mailVirus
mailClean
Description
The value of this object uniquely identifies each
mail stats entry.
Time interval pertaining to the data in this sequence.
Number of received messages for this interval.
Number of sent messages for this interval.
Number of spam messages for this interval.
Number of rejected messages for this interval.
Number of messages identified as containing a virus
for this interval.
Number of clean messages for this interval.
Traps
ePrism will send a SNMP trap on a system reboot
286