AFRTS Defense Media Center Satellite Handbook

Defense Media Center Satellite Handbook V.3.26
Figure 5-10 9834 IRD Main Menu
6. Use the up and down arrows on the front panel or the remote to select the
PRESET & LNB SETUP or press the number 2 on the remote control and
then press SELECT.
7. Cursor over using the left and right arrows to high light the LNB Pwr.
Press SELECT and then the up and down to choose POLARISER which
is the automatic mode. Press SELECT again to set the LNB Pwr to
POLARISER. The screen should now appear similar to figure 5-11.
Figure 5-11 Preset and LNB Setup Menu
Note: Far East viewers using pre-set 3 will have to change the
downlink frequency to 12.647 as shown in figure 5-11.
5-16