user's manual - Ana-Digi Systems

CHAPTER 6 COMMUNICATION FUNCTION
B) Registration list setting
Registration list is the area to register the sending/receiving information of the actual data.
After completing the link setting, you should set the registration no.‘0’in the registration list
area and the major setting items are shown on the upper side of registration list menu. If
you select (click twice) the relevant list in Figure 6.19, you can set the relevant items in
‘high speed link item modify’ screen of Figure 6.21. Figure 6.22 shows the screen after
setting the sending/receiving parameter. To modify the parameter, click twice the relevant
registration no. (Refer to Figure 6.21)
Figure 6.21 High speed link item modify screen
Figure 6.22 Sending/Receiving parameter setting completion screen (Example)
6-14