user's manual - Ana-Digi Systems
user's manual - Ana-Digi Systems
user's manual - Ana-Digi Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CHAPTER 6 COMMUNICATION FUNCTION<br />
• Communication opening verification<br />
Online Start Communication Start Debug Mode<br />
Point<br />
1) The size of sending area and receiving area is total I/O contact number created in<br />
KGLWIN.<br />
When setting K80S Slave in SyCon, the I/O contact number in Slave Setting should<br />
be the same as high speed link setting size of KGLWIN program.<br />
2) G4L-PUEA 1EA and GM7-PBEA 1EA are created in order and when setting<br />
the sending area of master as P004, receiving area as P002,<br />
* Sending area : P004<br />
* Receiving area : P002<br />
* Sending area size : 2 bytes<br />
* Receiving area size : 2 bytes<br />
* P004의 data -> output to K80S Slave module<br />
* K80S Slave module input -> saved in P002<br />
3) When using K80S as slave, set KGLWIN program in advance and open the<br />
communication by SyCon.<br />
6-54
Change language