Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
To remove the battery<br />
1. Make sure your device is turned off.<br />
2. Open the battery compartment.<br />
3. Lift the battery lock, then<br />
push the battery latch inward<br />
with the stylus tip. The battery<br />
automatically ejects from the<br />
bay.<br />
4. Pull the battery out of the bay,<br />
then set it aside.<br />
2 1<br />
Getting Started 27<br />
3<br />
Charge the battery<br />
New batteries are shipped partially charged. Before you start using your<br />
device, it is recommended that you install and charge the battery. Some<br />
batteries perform best after several full charge/discharge cycles.<br />
To charge the battery<br />
• Connect the power adapter<br />
to the device’s DC IN/SYNC<br />
port.<br />
Note<br />
• Connect the device to your<br />
computer using the provided<br />
USB Sync cable.<br />
Only the AC adapter and USB<br />
sync cable provided with your<br />
device must be used to charge<br />
the device.<br />
Charging is indicated by a solid amber light on the Notification LED 1 (GSM)<br />
indicator. As the battery is being charged while the device’s power is on, a<br />
charging icon appears in the title bar of the Today screen. After the battery<br />
has been fully charged, the Notification LED 1 charging indicator becomes<br />
green and a full battery icon appears in the title bar of the Today screen.<br />
Warning!<br />
• Do not remove the battery from the device while you are charging it<br />
using the AC or car adapter.<br />
• As a safety precaution, the battery stops charging when it overheats.
Change language