Full user manual - DevDB

64 Using Phone Features
To find a contact name or number
You can just enter the first letter of the name or number of a contact. Smart
Dialing will search for contact phone numbers and the first character of
a contact name as well as from the character that appears after a space,
dash, or underscore in a contact name. For example, if you tap on the
phone keypad, which is associated with [a, b, and c], contact names such
as the following will be considered matches: “Ben Miller”, “George Adams”,
“John-Carter”, “Carter, Ellen”, “Dixon, Allan”, “Thomas_Clark”, “Jane Campbell”.
If the matching list is long and you want to narrow down the search further,
enter another letter. Using the same example above, if you continue to tap
which is associated with [d, e, f], the matching list will be narrowed
down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”,
“Dixon, Allan”.
Make a call or send a text message using Smart Dialing
1. Tap Start > Phone to open the Phone screen.
2. Begin entering the first few numbers or characters.
When you start entering a number or letter, the Smart Dialing panel will
display matches found.
3. In the Smart Dialing panel, browse the list by tapping or , or
tapping to expand the panel size.
4. When the desired contact is selected, do one of the following:
• Tap to make a voice call
to the selected contact.
• To send a text message, tap and
hold the selected contact, then
tap Send Text Message from the
pop up menu.