Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
28 Getting Started<br />
1.3 Starting Up<br />
After installing your SIM card and battery and charging the PDA phone, you<br />
can now power on and start using your device.<br />
Turn your device on and off<br />
To turn on the power<br />
• Press and hold the POWER button for a few seconds.<br />
When you turn on your device for the first time, a Quick Start Wizard<br />
guides you through the calibration process and the setup of date<br />
and time, and password. For more information about touch screen<br />
calibration, see “Calibrate the device” later in this chapter. After the Quick<br />
Start Wizard finishes, the device installs customization settings, then<br />
restarts.<br />
Note<br />
After the device restarts, you may be prompted to set up an e-mail<br />
account. Refer to Chapter 7 for details.<br />
To turn off the power<br />
• Press and hold the POWER button for a few seconds.<br />
Tap Yes when a message prompts you to choose whether or not to turn<br />
off the device completely.<br />
Calibrate the device<br />
Calibrating the touch screen involves tapping the center of a cross with the<br />
stylus as the cross moves around the screen. This process ensures that when<br />
you tap the screen with your stylus, the tapped item is activated.<br />
If your device does not accurately respond to screen taps, follow these steps<br />
to re-calibrate it:<br />
1. Tap Start > Settings > System tab > Screen.<br />
2. On the General tab, tap Align Screen and follow the on-screen<br />
instructions to complete the calibration.<br />
Manage screen settings<br />
The device’s display supports two orientation modes: Portrait and<br />
Landscape. Do one of the following to change the screen orientation:
Change language