Full user manual - DevDB

Display settings
Setting Up Your Device 71
To adjust the screen brightness
• You can also tap Start > Settings > System tab > Backlight >
Brightness tab to adjust the screen brightness.
To set the backlight to dim after a time delay
1. Tap Start > Settings > System tab > Backlight.
2. Tap the Battery power or External power tab.
3. Select the Turn off backlight if device is not used for check box,
then specify the time delay.
To increase or decrease the size of text on the screen
1. Tap Start > Settings > System tab > Screen > Text Size tab.
2. Move the slider to increase or decrease the text size.
Device name
The device name is used to identify your device in the following situations:
• Synchronizing with a computer
• Connecting to a network
• Restoring information from a backup
Note
If you synchronize multiple devices with the same computer, each device
must have a unique name.
To change the device name
1. Tap Start > Settings > System tab > About.
2. Tap the Device ID tab.
3. Enter the device name.
Note
The device name must begin with a letter, consist of letters from A to
Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore
character to separate words.