Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connections tab<br />
Getting Started 43<br />
Icon<br />
Description<br />
Beam Set your device to receive incoming Bluetooth beams.<br />
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan<br />
for other Bluetooth devices.<br />
Comm Manager Manage your device’s connections (including 3G/GPRS,<br />
Wi-Fi, Bluetooth, and ActiveSync), turn the phone on or off, and enable or<br />
disable the Direct Push function.<br />
Connection Setup Configure your device’s data connections, such as 3G/<br />
GPRS, WAP, and MMS, based on the detected or selected network operator.<br />
See Chapter 10 for details.<br />
Connections Set up one or more types of modem connections for your<br />
device, such as phone dial-up, 3G/GPRS, and more, so that your device can<br />
connect to the Internet or a private local network.<br />
CSD Line Type Set the line type to use when making a circuit switch<br />
data (CSD) connection. Normally, you do not need to change the setting<br />
unless you encounter a problem on establishing a connection.<br />
Domain Enroll Enrol your device with your company’s domain to access<br />
company resources.<br />
GPRS Setting Set the GPRS authentication method.<br />
SMS Service Enables sending of SMS text messages via a data<br />
connection, such as GPRS or a circuit-switched connection.<br />
USB to PC Select the type of USB connection between your device and<br />
your PC.<br />
Wi-Fi Scan for available wireless networks.<br />
WLAN Display information about the active wireless network and<br />
customize Wi-Fi settings.
Change language