SMX Programming Manual for the SMX Module - OEM Automatic AB
SMX Programming Manual for the SMX Module - OEM Automatic AB
SMX Programming Manual for the SMX Module - OEM Automatic AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PC-COM<br />
The COM interface used by <strong>the</strong> Windows driver must be set.<br />
CAN Bus<br />
Address setting <strong>for</strong> diagnostics channel via CAN bus. The setting uses <strong>the</strong> hex data<br />
<strong>for</strong>mat.<br />
Address of <strong>the</strong> 1st CAN telegram: 0x001 to 0x063 or 0x83 to 0x7FF.<br />
Aktivating extended data with CAN bus<br />
Address of <strong>the</strong> 2nd CAN telegram: 0x001 to 0x063 or 0x83 to 0x7FF.<br />
The value must not be <strong>the</strong> same as <strong>the</strong> 1st CAN address.<br />
Cyclic transmission<br />
This option can be used to set <strong>the</strong> <strong>SMX</strong>-system transmission interval in cycles<br />
(1 cycle = 8ms).<br />
Connection dialog<br />
Connect: Starts <strong>the</strong> connection to <strong>the</strong> <strong>SMX</strong>-system<br />
Quit: Cancels an active connection.<br />
<strong>Programming</strong> <strong>Manual</strong> – <strong>SMX</strong> Basic <strong>Module</strong>s 29.10.2009 Page 22 of 183
Change language