Blu-ray Disc PLAYER - Pioneer

3 Select and set Server Select Method.
Use / to change, then press .
When Auto Set IP Address is set to On, the values obtained
automatically are displayed.
Network
BD PLAYER
06
CLEAR
SECONDARY
AUDIO VIDEO
VIDEO SELECT
HOME MEDIA
GALLERY
PLAY MODE
DISPLAY
ENTER
OUTPUT
RESOLUTION
POPUP MENU
MENU
Display Network Config.
MAC Address
IP Address
Subnet Mask
Default Gateway
DNS Server (Primary)
DNS Server (Secondary)
00 - E0 - 36 - 00 - 00 - 00
192 . 168 . 0 . 2
255 . 255 . 255 . 0
192 . 168 . 0 . 1
0 . 0 . 0 . 0
0 . 0 . 0 . 0
TOP MENU
TOOLS
HOME
MENU
ENTER
RETURN
Note
• “0.0.0.0” is displayed when each IP address has not been set.
Testing the network connection
• IP Address – Input the IP address.
• Server Name – Input the server name.
4 Input IP Address or Server Name.
Use the number buttons (0 to 9) to input the number if you select IP
address by step 3. Use / to move the cursor.
Use the number buttons (0 to 9) to input characters if you select
Server Name by step 3.
The characters that can be input for the server name are listed on
the table below. Pressing a button repeatedly cycles through the
characters shown.
• If you want to enter two characters in succession that are both
on the same button (for example a P and an R), press after
inputting the first character then input the second character.
•Use CLEAR to delete the last character.
•Use / to move the displayed characters when all the input
characters cannot be displayed.
5 Input Port Number.
Press , use the number buttons (0 to 9) to input the number.
6 Press ENTER to set.
Key Characters Key Characters
1 1 . – 6 m n o 6
2 a b c 2 7 p q r s 7
3 d e f 3 8 t u v 8
4 g h i 4 9 w x y z 9
5 j k l 5 0 0
Displaying the network settings
1 Select and set Network Connection Test Start.
Use / to select, then press ENTER.
“Network connection test completed successfully.” is displayed
once the test is completed. If any other message is displayed, check
the connections and/or settings (pages 18 and 48).
Erasing the additional data from BD-ROMs
When a BD-ROM is played, additional data may be stored in the
player’s memory (local storage).
If the message indicating low memory (local storage) appears, erase
the BDMV data.
Caution
• When the BDMV data is erased, all the data of secondary video
(Picture-in-Picture), secondary audio, bookmark, etc. that has
been stored is erased.
• It takes time to erase the BDMV data for a while. Do not unplug
the power cord while the data is being erased.
1 Select and set Options BDMV Data Erase Next Screen.
Use / to select, then press ENTER.
2 Erase the data.
Use / to select Yes, then press ENTER.
OK to erase additional
BDMV data?
Do not turn power off
during erasure.
Yes
No
1 Select and set Network Display Network Configuration
Next Screen.
Use / to select, then press ENTER.
The MAC address, IP address, subnet mask, default gateway and
DNS server (primary and secondary) settings are displayed.
49
En