cmd6686gx manual - RTD Embedded Technologies, Inc.

Standard CMOS Setup
The following is an alphabetical list of Standard CMOS Setup fields.BIOS Features Setup
Standard CMOS Setup Fields
Field Active keys Selections
Date {0..9},{↵} Sets the date with the format:
• month / day / year
• You must connect a backup battery, or this
setting will be lost at power down.
Time {0..9},{↵} Sets the time with the format:
• hour: minute: second
• You must connect a backup battery, or this
setting will be lost at power down.
Hard Disk
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Drive A
Drive B
Halt On
+, -, ,
+, -, ,
+, -, ,
Selects the IDE hard disk type for each interface.
An interface must have a master before a slave
can be added. Make sure you configure the drive
jumpers correctly.
Selections are:
• None
• Auto (Auto detect drive parameters, not all
drives can be auto detected)
• 1 - 45 Standard drive types
• USER (User enters drive parameters)
Selects the format of each floppy disk:
Selections are:
• None
• 360 KB, 5¼" Floppy
• 1.2 MB, 5¼" Floppy
• 720 KB, 3½" Floppy
• 1.44/1.25 MB, 3½" Floppy
• 2.88 MB, 3½" Floppy
•
• All, But Keyboard
• All, But Diskette
• All, But Disk/Key
• All Errors
• No Errors
58