cmd6686gx manual - RTD Embedded Technologies, Inc.
cmd6686gx manual - RTD Embedded Technologies, Inc.
cmd6686gx manual - RTD Embedded Technologies, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BIOS Features Setup<br />
The following is a list of BIOS Features Setup fields.<br />
BIOS Features Setup Fields<br />
Field Active keys Selections<br />
Virus warning<br />
CPU Internal<br />
Cache<br />
Quick power on<br />
self test<br />
Boot Sequence<br />
Swap floppy drive<br />
Boot up floppy<br />
seek<br />
Boot Up System<br />
Speed<br />
Boot up numlock<br />
status<br />
Gate A20 option<br />
Memory Parity<br />
Check<br />
Typematic rate setting<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
+, -, ,<br />
<br />
Enable or disable virus warning<br />
• Enable -- Warn if boot sector or partition table<br />
is being modified<br />
• Disable -- Allow boot sector or partition table<br />
modification<br />
Enable or disable CPU internal cache<br />
• Enable -- Enable CPU internal 16 KB cache<br />
• Disable -- Disable CPU internal 16 KB cache<br />
Enable or disable quick boot<br />
• Enable -- Skip or shorten some tests to allow<br />
the system to boot faster<br />
• Disable -- Perform all power on self tests<br />
Select from the options the boot sequence for the<br />
CPU<br />
Swap floppy drive A: and B:<br />
• Enable -- Floppy connected after the twist in<br />
the floppy wire will be Drive B: and floppy<br />
connected before the twist in the floppy wire<br />
will be Drive A:<br />
• Disable (Normal) -- Floppy connected after the<br />
twist in the floppy wire will be Drive A: and<br />
floppy connected after the twist in the floppy<br />
wire will be Drive B:<br />
Note: This only works with two floppies installed.<br />
Perform floppy seek to determine if floppy is a 40<br />
tracks 360 KB or an 80 track 1.2 MB, 720 KB or<br />
1.44 MB<br />
• Enable -- Perform check<br />
• Disable -- Skip check<br />
• High<br />
• Low<br />
Set keypad numlock status after boot<br />
• On -- Keypad is number keys<br />
• Off -- Keypad is cursors keys<br />
Select gate A20 options<br />
• Normal -- Use keyboard controller to control<br />
A20 gate<br />
• Fast -- Allow chipset to control A20 gate<br />
• Enable<br />
• Disable<br />
Determines if typematic is to be used<br />
• Enable -- Enable typematic rate<br />
• Disable -- Disable typematic rate<br />
59