User Guide and Manual for Project Canary

Note that the “domain names” of the servers listed in the above report are alike. This report is useful for not
only taking a look at the raw data captured to draw the automount png graph, but also to see if groups of
servers are configured alike or not. In the example automount dat file shown above, the raw data shows that
different servers in different groupings must be configured differently (or be used in quite different manners)
as the data is “alike” for most servers in a single group.
When reading the automount png graph it is a good idea to keep a second browser window open to the
automount dat report to compare the graph to the raw data in order to get a better feel for what the graph is
trying to say.
4.12.3: esd png Report
The esd png graph shows the CPU utilization for the esd daemon across all servers monitored by Project
Canary software and is shown below:
User Guide and Manual for Project Canary Page 108