Release Notes: Version E.10.37 Software

Software Fixes in Release E.06.xx through E.10.xx
Release E.09.02 (Beta Only)
■
SNMP/Authorized Manager (PR_1*86062) — SNMP Sets allowed when in Operator
mode and IP Authorized-Manager is set.
Release E.09.02 (Beta Only)
Problems Resolved in Release E.09.02
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
DMA Driver (PR_1000209595) — ASSERT_RESOURCE prints No resources available
if it fails.
IP Addmgr (PR_1000202539) — ARP cache gets cleared whenever a port comes up.
IP Addmgr (PR_1000206356) — Software exception at ipamMAcl.c:712 -- host table
filled with no ACLs.
MGR (PR_1000202237) — VLAN MAC table flushing does not work.
Mirror Port (PR_1000204834) — Mirror-Port adds a VLAN tag to untagged, monitored
traffic.
NAT (PR_1000199309) — NAT getting lost when cable moved.
Other (PR_1000204617) — Port mirroring and ACLS cause blade assert at dmaRx.c:1319.
Other (PR_1000208358) — Mac-to-Host route table mismatch.
Other (PR_1000092011) — Software exception at c:356 -- in 'mHttpCtrl'.
Password (PR_1000201614) — Non-Null terminated password causes bus error crash in
setup menu.
Rate Limiting (PR_1000201978) — Radius rate-limiting-ingress should allow greater than
100%.
RMON (PR_1000011690) — When RMON thresholds in the switch are exceeded, no trap
is generated.
Self-Test (PR_1000200371) — Ports are not isolated during the selftest internal loopback
testing.
SNMP (PR_1000196170) — Traps are not buffered before the IP stack is initialized, causing
the possibility of missing some traps generated during startup.
SNTP (PR_1000199632) — NTP (SNTP) version 4 broadcast ignored by switch.
Tst.System (PR_1000204782) — Bus error when copying a configuration to the switch.
41